14members の履歴(No.1)

プレゼミ!!†

メンバー情報†

 Blink
 Turns on an LED on for one second, then off for one second, repeatedly.

 This example code is in the public domain.
*/

int led = 9; int pin = 13; int sensor = 0;

void setup() {

 // initialize the digital pin as an output.
 pinMode(led, OUTPUT);
 pinMode(pin, OUTPUT);

}

int old = 0; int value = 0; void loop() {

 value = analogRead(sensor);
 analogWrite(8, value/4);

 /*
 int now = millis();
 if(now - old > 3000){
   analogWrite(0, HIGH);
   old = now;
 }else{
   analogWrite(0, LOW);
 }

}

 digitalWrite(pin, HIGH);   // turn the LED on (HIGH is the voltage

level)

 digitalWrite(led, LOW);
 delay(1000);               // wait for a second
 digitalWrite(pin, LOW);    // turn the LED off by making the voltage

LOW

 digitalWrite(led, HIGH);
 delay(1000);  // wait for a second

digitalWrite(pin, HIGH); // turn the LED on (HIGH is the voltage level)

 digitalWrite(led, HIGH);
 delay(500);               // wait for a second
 digitalWrite(pin, LOW);    // turn the LED off by making the voltage

LOW digitalWrite(led, LOW);

 delay(500);
 digitalWrite(led, HIGH);
 delay(700);
   digitalWrite(pin, HIGH);
     digitalWrite(led, LOW);
     delay(300);
       digitalWrite(pin, LOW);
         digitalWrite(led, HIGH);
         delay(500);
  for(int i=0; i<5; i++){
   digitalWrite(pin, HIGH);
   for(int j=0; j<10; j++){
    digitalWrite(led, LOW);
    delay(50);
    digitalWrite(led, HIGH);
    delay(50);
   }
   digitalWrite(pin, LOW);
   digitalWrite(led, LOW);
   delay(1000);
  }
  for(int j=0; j<50; j++){
   digitalWrite(pin, LOW);
   delay(5);
   digitalWrite(pin, HIGH);
   delay(1);
  }
  for(int k=0; k<50; k++){
    digitalWrite(pin ,HIGH);
    delay(1);
    digitalWrite(pin,LOW);
    delay(1);
    digitalWrite(led,HIGH);
    delay(1);
    digitalWrite(led,LOW);
    delay(1);
  }

↑

/†

}